# 3D printing favour

**URL:** <https://discourse.cumbriacq.com/t/3d-printing-favour/582>\
**Category:** General\
**Created:** [14 November 2026 11:47 UTC](https://discourse.cumbriacq.com/t/3d-printing-favour/582 "2026-11-14T11:47:05Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![g7kse](https://discourse.cumbriacq.com/user_avatar/discourse.cumbriacq.com/g7kse/32/65_2.png) [@g7kse](https://discourse.cumbriacq.com/u/g7kse)\
**Post date:** [14 November 2026 11:47 UTC](https://discourse.cumbriacq.com/t/3d-printing-favour/582/1 "2026-11-14T11:47:05Z")

</div>

I’m after a favour from someone with a 3D printer if possible.

I have a 10 inch rack that I’m building for the packet node (will be taking it to FARS in December for a talk) and I could do with a part being printed. Its a 2U sized part so its too wide for my printer by a few mm.

Just wondering if anyone has a printer that can do be a part. I can supply the PLA and STL, just need it printed and don’t want to send it to China unless I have to.

---

<div class="post-metadata">

**Author:** ![OWSquirl](https://discourse.cumbriacq.com/user_avatar/discourse.cumbriacq.com/owsquirl/32/532_2.png) [@OWSquirl](https://discourse.cumbriacq.com/u/OWSquirl)\
**Post date:** [14 November 2026 18:09 UTC](https://discourse.cumbriacq.com/t/3d-printing-favour/582/2 "2026-11-14T18:09:01Z")

</div>

I have an A1, might be able to help you out, You got any more details of what you want printing.

If it’s Labrax that you’re building, I have one already built if you’re interested.

Would swap it for a couple of rolls of filament.